Incubadoras
Mostrando 1–16 de 19 resultados
Filters
Sort results
Reset
Apply
REGULACIÓN ELECTRÓNICA DE LA TEMPERATURA Y TIEMPO CON LECTURA DIGITAL Y PURGADO ATMOSFÉRICO.
PARA TEMPERATURAS DESDE 115 °C HASTA 134 °C (0,62 a 2 bar).
CONFORME A LAS DIRECTIVAS DE APARATOS DE PRESIÓN.
MODELO VERTICAL. CAPACIDADES: 50 Y 80.
CARACTERÍSTICAS
Mueble exterior y encimera en acero inox.
Elemento calefactor… Ver más (+) REGULACIÓN ELECTRÓNICA DE LA TEMPERATURA Y TIEMPO CON LECTURA DIGITAL Y PURGADO ATMOSFÉRICO.
PARA TEMPERATURAS DESDE 115 °C HASTA 134 °C (0,62 a 2 bar).
CONFORME A LAS DIRECTIVAS DE APARATOS DE PRESIÓN.
MODELO VERTICAL. CAPACIDADES: 50 Y 80.
CARACTERÍSTICAS
Mueble exterior y encimera en acero inox.
Elemento calefactor en acero inox. especial INCOLOY de gran duración, resistente a
la corrosión y a la alta temperatura.
Conexión RS-232.
Puerto sonda externa lateral.
Depósito, tapa y cierre en acero inox.
Purgado atmosférico automático.
Se suministran sin cestillos y sin tambores.
SEGURIDAD
VÁLVULA DE SEGURIDAD: PREVIENE QUE LA PRESIÓN SOBREPASE EL LÍMITE MÁXIMO.
PRESOSTATO DE SEGURIDAD: DESCONECTA LOS CALEFACTORES EN CASO DE SOBREPASAR EL LÍMITE DE PRESIÓN.
TERMOSTATO DE SEGURIDAD: DESCONECTA LA CALEFACCIÓN EN CASO DE SOBRETEMPERATURA O FALTA DE AGUA EN EL DEPÓSITO.
DISPOSITIVO TAPA: IMPIDE LA APERTURA DE LA TAPA MIENTRAS LA CÁMARA SE ENCUENTRA BAJO PRESIÓN.
ENVOLVENTE DE PROTECCIÓN TÉRMICA DE LA TAPA.
Ver menos (-) |
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |
|
A CONVECCIÓN NATURAL.
TERMOSTATO REGULADOR DE TEMPERATURA Y TERMÓMETRO DIGITALES.
PARA TEMPERATURAS REGULABLES DESDE AMBIENTE +5 °C HASTA 80 °C.
ESTABILIDAD: ±0,1 °C, A 37 °C. HOMOGENEIDAD: ±0,5 °C, A 37 °C
PUERTA INTERIOR DE CRISTAL TEMPLADO.
DOBLE CÁMARA, INTERIOR SIN APERTURAS FÁCIL DE LIMPIAR.
|
a partir de1.077,87€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |
|
Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0… Ver más (+) Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
controller SW can be upgraded through USB port
RS232C interface for monitoring and controlling (WireRemote)
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing
Safety mechanism:
overheat and over-current protection
sensor error detection and locking mode
Controller:
Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons
Incubator WIG, 2 PE-coated steel wire shelves, power cable, instruction manual
»Mostrar...+»
Features
Jog-Dial controller:
ergonomic design for easy and convenient usage
2-way Jog-Dial knob provides simple setting of required temperature and time
high quality illuminated LCD
„MAIN“ and „SUB“ button to access all menus
Temperature uniformity successfully tested by ASTM standards:All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.
Green product:All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.
Gravity-air:The incubators gravity-air flow is established by creating radiant and conductive heat on three sides of the chamber (bottom, left and right side).
»Mostrar...-»
Ver menos (-) |
a partir de1.296,21€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 10 - 12 días laborables. |
|
Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C… Ver más (+) Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
RS232C interface for monitoring and controlling (WireRemote) storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing
Safety mechanism:
overheat and over-current protection
sensor error detection and locking mode
Controller:
Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons
Incubator WIF, 2 PE-coated steel wire shelves, power cable, instruction manual
»Mostrar...+»
Features
Jog-Dial controller:
ergonomic design for easy and convenient usage
2-way Jog-Dial knob provides simple setting of required temperature and time
high quality illuminated LCD
„MAIN“ and „SUB“ button to access all menus
Temperature uniformity successfully tested by ASTM standards:All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.
Green product:All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.
Forced-air: The incubators forced-air flow is established by a three sided heating element in combination with a very effective fan placed in an air-flow room for best temperature uniformity in the whole chamber.
»Mostrar...-» Ver menos (-) |
a partir de1.540,95€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 10 - 12 días laborables. |
|
A CONVECCIÓN NATURAL.
REGULACIÓN POR MICROPROCESADOR Y CONTROL POR PANTALLA TÁCTIL CON TECNOLOGÍA TFT.
PARA TEMPERATURAS REGULABLES DESDE AMBIENTE +5 °C HASTA 80 °C.
ESTABILIDAD: ±0,1 °C, A 37 °C. HOMOGENEIDAD: ±0,5 °C, A 37 °C.
ERROR DE CONSIGNA: ±2%, A TEMPERATURA DE TRABAJO. RESOLUCIÓN: 0,1 °C.
… Ver más (+) A CONVECCIÓN NATURAL.
REGULACIÓN POR MICROPROCESADOR Y CONTROL POR PANTALLA TÁCTIL CON TECNOLOGÍA TFT.
PARA TEMPERATURAS REGULABLES DESDE AMBIENTE +5 °C HASTA 80 °C.
ESTABILIDAD: ±0,1 °C, A 37 °C. HOMOGENEIDAD: ±0,5 °C, A 37 °C.
ERROR DE CONSIGNA: ±2%, A TEMPERATURA DE TRABAJO. RESOLUCIÓN: 0,1 °C.
PUERTA INTERIOR DE CRISTAL TEMPLADO.
DOBLE CÁMARA, MÍNIMO RIESGO DE CONTAMINACIÓN DE LAS MUESTRAS.
INTERIOR SIN APERTURAS Y CON ESQUINAS REDONDEADAS. FÁCIL DE LIMPIAR.
SEGURIDAD:
NORMA EN 61010. LIMITADOR FIJO DE SOBRECALENTAMIENTO INCORPORADO.
NORMA DIN 12880. TERMOSTATO DE SEGURIDAD REGULABLE INCORPORADO. Ver menos (-) |
a partir de1.615,96€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |
|
Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
gravity-air flow by natural flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass… Ver más (+) Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
gravity-air flow by natural flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
ambient to 70°C of temperature range, fluctuation of ±0.2°Cat 37°C, ±0.3°C at 50°C
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing
Safety mechanism:
overheat and over-current protection
sensor error detection
Controller:
Smart-Lab™ controller with 4? full touch screen TFT LCD:
WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi
Incubator SWIG, 2 PE-coated steel wire shelves, power cable, instruction manual
»Mostrar...+»
Features
SMART-LabTM Controller
full touch screen TFT LCD:
WiRe™ app service, remote control system
variable program settings
self-diagnosis and interactive temperature graph
automatic data recording and password protection
data transfer to PC by USB memory
digital calibration (offset function)
min-/max-temperature memory & program function
push-alarm service to smartphone or tablet PC
Temperature uniformity successfully tested by ASTM standards: All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.
Green product: All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.
Gravity-air: The incubators gravity-air flow is established by creating radiant and conductive heat on three sides of the chamber (bottom, left and right side
»Mostrar...-»
Ver menos (-) |
a partir de1.797,43€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 10 - 12 días laborables. |
|
Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing… Ver más (+) Ideal for:
microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Features:
optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
storage function for the set values of temperature and timer
alarm function: error status and timer end
CE & UL/CUL certified and unique serial number for tracing
Safety mechanism:
overheat and over-current protection
sensor error detection
Controller:
Smart-Lab™ controller with 4? full touch screen TFT LCD:
WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi
Incubator SWIF, 2 PE-coated steel wire shelves, power cable, instruction manual
»Mostrar...+»
Features
SMART-LabTM Controller:
full touch screen TFT LCD:
WiRe™ app service, remote control system
variable program settings
self-diagnosis and interactive temperature graph
automatic data recording and password protection
data transfer to PC by USB memory
digital calibration (offset function)
min-/max-temperature memory & program function
push-alarm service to smartphone or tablet PC
Temperature uniformity successfully tested by ASTM standards: All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.
Green product: All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.
Forced-air: The incubators forced-air flow is established by a three sided heating element in combination with a very effective fan placed in an air-flow room for best temperature uniformity in the whole chamber.
»Mostrar...-» Ver menos (-) |
a partir de2.043,38€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 10 - 12 días laborables. |
|
CAPACIDAD: 12 LITROS.
CONTROL DE TEMPERATURA Y CICLO POR MICROPROCESADOR.
SISTEMA DE SECADO Y PURGADO AUTOMÁTICO POR VACÍO FRACCIONADO.
CON PROGRAMAS A 121 °C Y 134 °C ( 1 Y 2 bar).
MODELO HORIZONTAL DE SOBREMESA.
CARACTERÍSTICAS
Cámara interior en acero inox.
Purgado por vacío fraccionado.
Secado por vacío.
Generador… Ver más (+) CAPACIDAD: 12 LITROS.
CONTROL DE TEMPERATURA Y CICLO POR MICROPROCESADOR.
SISTEMA DE SECADO Y PURGADO AUTOMÁTICO POR VACÍO FRACCIONADO.
CON PROGRAMAS A 121 °C Y 134 °C ( 1 Y 2 bar).
MODELO HORIZONTAL DE SOBREMESA.
CARACTERÍSTICAS
Cámara interior en acero inox.
Purgado por vacío fraccionado.
Secado por vacío.
Generador de vapor externo.
Depósito de agua para alimentar la caldera.
Gran penetración en productos porosos.
Útil en estomatología, oftalmología, quirófanos, etc.
SEGURIDAD
Válvula de seguridad. Previene que la presión sobrepase
el límite máximo.
Termostato de seguridad. Desconecta la calefacción
en caso de sobretemperatura o falta de agua en el depósito.
Envolvente de protección térmica de la tapa. Ver menos (-) |
Precio:2.749,17€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |
|
A CONVECCIÓN NATURAL.
REGULACIÓN POR MICROPROCESADOR Y CONTROL POR PANTALLA TÁCTIL CON TECNOLOGÍA TFT.
PARA TEMPERATURAS REGULABLES DESDE AMBIENTE +5 °C HASTA 80 °C.
ESTABILIDAD: ±0,2 °C, A 37 °C. HOMOGENEIDAD: ±0,7 °C, A 37 °C.
ERROR DE CONSIGNA: ±2%, A TEMPERATURA DE TRABAJO. RESOLUCIÓN: 0,1 °C.
… Ver más (+) A CONVECCIÓN NATURAL.
REGULACIÓN POR MICROPROCESADOR Y CONTROL POR PANTALLA TÁCTIL CON TECNOLOGÍA TFT.
PARA TEMPERATURAS REGULABLES DESDE AMBIENTE +5 °C HASTA 80 °C.
ESTABILIDAD: ±0,2 °C, A 37 °C. HOMOGENEIDAD: ±0,7 °C, A 37 °C.
ERROR DE CONSIGNA: ±2%, A TEMPERATURA DE TRABAJO. RESOLUCIÓN: 0,1 °C.
PUERTA INTERIOR DE CRISTAL TEMPLADO.
Ver menos (-) |
a partir de3.011,25€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |
|
REGULACIÓN POR PRESOSTATO A 1 Y 2 bar. PARA TEMPERATURAS A 121 ºC Y 134 ºC.
MODELO VERTICAL DE SOBREMESA “MICRO 8” CAPACIDAD: 8 LITROS.
CARACTERÍSTICAS
Mueble exterior y encimera en acero inox. AISI 304.
Depósito y tapa en acero inox. de fácil apertura.
Elemento calefactor en acero inox. especial… Ver más (+) REGULACIÓN POR PRESOSTATO A 1 Y 2 bar. PARA TEMPERATURAS A 121 ºC Y 134 ºC.
MODELO VERTICAL DE SOBREMESA “MICRO 8” CAPACIDAD: 8 LITROS.
CARACTERÍSTICAS
Mueble exterior y encimera en acero inox. AISI 304.
Depósito y tapa en acero inox. de fácil apertura.
Elemento calefactor en acero inox. especial INCOLOY de gran duración, resistente a la corrosión y a la alta temperatura.
Evacuación manual del aire a la puesta en marcha.
Cierre simple y seguro, con dispositivo de seguridad de la apertura de la tapa.
Interruptor general de puesta en marcha.
Se suministra con un cestillo de alambre en acero inox. de Ø 22 x 14 cm alto. Cód. 1004771
SEGURIDAD
VÁLVULA DE SEGURIDAD: PREVIENE QUE LA PRESIÓN SOBREPASE EL LÍMITE MÁXIMO.
PRESOSTATO DE SEGURIDAD: DESCONECTA LOS CALEFACTORES EN CASO DE SOBREPASAR EL LÍMITE DE PRESIÓN.
TERMOSTATO DE SEGURIDAD: DESCONECTA LA CALEFACCIÓN EN CASO DE SOBRETEMPERATURA O FALTA DE AGUA EN EL DEPÓSITO.
ENVOLVENTE EN TERMOPLÁSTICO MOLDEADO PARA PROTECCIÓN TÉRMICA DE LA TAPA.
Ver menos (-) |
Precio:3.273,61€
Bajo pedido.Consultar plazo. Entrega estimada habitualmente entre 6 - 8 días laborables. |